Diagnostic Sequence Window
![1](drex_bullet_1.png) Allow detection tests that
don't prove anything good check
|
|
![2](drex_bullet_2.png) Allow detection tests that
don't detect anything bad check
|
|
![3](drex_bullet_3.png) Repeated detection tests only
prove good on last test check
|
|
![4](drex_bullet_4.png) Allow isolation tests that result
in an empty suspect set check
|
|
![5](drex_bullet_5.png) Allow isolation tests that do
not reduce suspect set check
|
|
![6](drex_bullet_6.png) Prune for Block Replacement check
|
|