Moving single ports can be accomplished using a simple drag-and-drop operation. One or more selected ports can be moved to a specified side of their object using context-specific operations in the pop-up context menu for ports. Note: In order to Drag Ports the Port options panel must be set to allow port draging with distribute evenly turned offif the ports are to remain on the same side and is being place in a non evenly spacing with other ports. See Automatic Port Distribution Settings
Right-click on one of the selected ports (or on the background of the design sheet) to display the pop-up context menu for ports.
Alternative: Select Ports within the Design menu.
3
Select the desired side (left, right, top, bottom) from the Move To submenu.
Notes:
When certain settings are enabled on the Port Auto-Distribute Settings dialog, eXpress will automatically reposition ports after they have been moved. For example, if "Distribute Evenly" and "Alphabetize" are enabled, then ports will return to the same position unless they are dragged to a different side of the object.
Ports can only be dragged to a new location within the same object. To move ports between objects, use the Cut and Paste operations.
